] kernel/system logger ok
<5>Linux version 2.6.12-12mdk-i586-up-1GB (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 17:51:55 CEST 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001dfd0000 (usable)
<4> BIOS-e820: 000000001dfd0000 - 000000001dfde000 (ACPI data)
<4> BIOS-e820: 000000001dfde000 - 000000001e000000 (ACPI NVS)
<4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
<5>479MB LOWMEM available.
<6>found SMP MP-table at 000ff780
<7>On node 0 totalpages: 122832
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 118736 pages, LIFO batch:31
<7>  HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f78e0
<7>ACPI: RSDT (v001 A M I  OEMRSDT  0x05000520 MSFT 0x00000097) @ 0x1dfd0000
<7>ACPI: FADT (v002 A M I  OEMFACP  0x05000520 MSFT 0x00000097) @ 0x1dfd0200
<7>ACPI: MADT (v001 A M I  OEMAPIC  0x05000520 MSFT 0x00000097) @ 0x1dfd0390
<7>ACPI: MCFG (v001 A M I  OEMMCFG  0x05000520 MSFT 0x00000097) @ 0x1dfd0400
<7>ACPI: OEMB (v001 A M I  AMI_OEM  0x05000520 MSFT 0x00000097) @ 0x1dfde040
<7>ACPI: MCFG (v001 A M I  OEMMCFG  0x05000520 MSFT 0x00000097) @ 0x1dfd6510
<7>ACPI: SSDT (v001    AMI   CPU1PM 0x00000001 INTL 0x02002026) @ 0x1dfd6550
<7>ACPI: DSDT (v001  R15D0 R15D0000 0x00000000 INTL 0x02002026) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 6:13 APIC version 20
<4>ACPI: 2 duplicate MCFG table ignored.
<6>Using ACPI for processor (LAPIC) configuration information
<6>Intel MultiProcessor Specification v1.4
<6>    Virtual Wire compatibility mode.
<6>OEM ID: Intel    Product ID: Alviso       APIC at: 0xFEE00000
<6>I/O APIC #1 Version 32 at 0xFEC00000.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Processors: 1
<4>Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1b80000)
<4>Built 1 zonelists
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Initializing CPU#0
<5>Kernel command line: initrd=alt0/all.rdz acpi=ht vga=788 splash=silent BOOT_IMAGE=alt0 noauto noapic noacpi noapm
<6>bootsplash: silent mode.
<4>PID hash table entries: 2048 (order: 11, 32768 bytes)
<4>Detected 1733.586 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 477648k/491328k available (2116k kernel code, 13024k reserved, 717k data, 244k init, 0k highmem, 0k BadRAM)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 3432.44 BogoMIPS (lpj=1716224)
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
<7>CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<7>CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Freeing initrd memory: 5279k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
<6>PCI: Using MMCONFIG
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050309
<6>ACPI: Interpreter disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI: disabled
<6>PnPBIOS: Disabled
<4>PCI: Probing PCI hardware
<4>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:00:02.0
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
<6>PCI: Transparent bridge - 0000:00:1e.0
<6>PCI: Discovered primary peer bus ff [IRQ]
<6>PCI: Using IRQ router PIIX/ICH [8086/2641] at 0000:00:1f.0
<4>PCI: IRQ 0 for device 0000:00:1f.2 doesn't match PIRQ mask - try pci=usepirqmask
<6>PCI: Found IRQ 7 for device 0000:00:1f.2
<6>PCI: Sharing IRQ 7 with 0000:00:1d.1
<6>IRQ routing conflict for 0000:00:1f.3, have irq 10, want irq 7
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<6>audit: initializing netlink socket (disabled)
<3>audit(1135237295.883:0): initialized
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x0
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xde880000, using 3750k, total 32448k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=32
<6>vesafb: protected mode interface info at 00ff:44f0
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash: scanning last 2MB of initrd for signature
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 34430 bytes,<6>...found (800x600, 34382 bytes, v3).
<4>Console: switching to colour frame buffer device 93x30
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: No PS/2 controller found. Probing ports directly.
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>PCI: Found IRQ 10 for device 0000:00:1e.3
<6>PCI: Sharing IRQ 10 with 0000:01:07.0
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
<5>pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>mice: PS/2 mouse device common for all mice
<6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>NET: Registered protocol family 1
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<4>devfs_mk_dev: could not append to parent for md/0
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>EXT2-fs warning: checktime reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<6>bootsplash: status on console 0 changed to on
<6>Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0
<6>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>USB Universal Host Controller Interface driver v2.2
<6>PCI: Found IRQ 11 for device 0000:00:1d.0
<6>PCI: Sharing IRQ 11 with 0000:00:1d.7
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000d880
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>PCI: Found IRQ 7 for device 0000:00:1d.1
<6>PCI: Sharing IRQ 7 with 0000:00:1f.2
<6>IRQ routing conflict for 0000:00:1f.3, have irq 10, want irq 7
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000d800
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>PCI: Found IRQ 6 for device 0000:00:1d.2
<6>PCI: Sharing IRQ 6 with 0000:01:04.0
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.2: irq 6, io base 0x0000d480
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>PCI: Found IRQ 10 for device 0000:00:1d.3
<6>PCI: Sharing IRQ 10 with 0000:00:02.0
<6>PCI: Sharing IRQ 10 with 0000:01:05.0
<7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000d400
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>PCI: Found IRQ 11 for device 0000:00:1d.7
<6>PCI: Sharing IRQ 11 with 0000:00:1d.0
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: debug port 1
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
<6>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfbe3bc00
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 8 ports detected
<7>ieee80211_crypt: registered algorithm 'NULL'
<6>ieee80211: 802.11 data/management/control stack, 1.0.3
<6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
<6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
<6>ipw2200: Copyright(c) 2003-2004 Intel Corporation
<6>PCI: Found IRQ 6 for device 0000:01:04.0
<6>PCI: Sharing IRQ 6 with 0000:00:1d.2
<6>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
<3>ipw2200: ipw-2.3-boot.fw load failed: Reason -2
<3>ipw2200: Unable to load firmware: 0xFFFFFFFE
<3>ipw2200: failed to register network device
<4>ipw2200: probe of 0000:01:04.0 failed with error -5
<6>r8169 Gigabit Ethernet driver 2.2LK loaded
<6>PCI: Found IRQ 10 for device 0000:01:06.0
<6>PCI: Sharing IRQ 10 with 0000:00:1e.2
<7>eth0: Identified chip type is 'RTL8169s/8110s'.
<6>eth0: RTL8169 at 0xde840c00, 00:40:45:27:de:92, IRQ 10
<7>ieee1394: Initialized config rom entry `ip1394'
<6>ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
<6>PCI: Found IRQ 10 for device 0000:01:07.0
<6>PCI: Sharing IRQ 10 with 0000:00:1e.3
<4>ohci1394: fw-host0: Unexpected PCI resource length of 1000!
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[fbffd000-fbffd7ff]  Max Packet=[2048]
<6>NET: Registered protocol family 17
<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00012f650000a124]
<6>r8169: eth0: link up
<6>loop: loaded (max 256 devices)
<6>gzloop: loaded
<6>/sysroot/tmp/mdkinst.clp: 1331 blocks, 65536 bytes/block, largest block is 65562 bytes.
<7>ISO 9660 Extensions: RRIP_1991A
] kernel/system logger ok
<6>Freeing unused kernel memory: 244k freed
<5>SCSI subsystem initialized
<7>libata version 1.11 loaded.
<7>ahci version 1.00
<6>PCI: Found IRQ 7 for device 0000:00:1f.2
<6>PCI: Sharing IRQ 7 with 0000:00:1d.1
<6>IRQ routing conflict for 0000:00:1f.3, have irq 10, want irq 7
<4>ahci: probe of 0000:00:1f.2 failed with error -12
<7>ata_piix version 1.03
<6>PCI: Found IRQ 7 for device 0000:00:1f.2
<6>PCI: Sharing IRQ 7 with 0000:00:1d.1
<6>IRQ routing conflict for 0000:00:1f.3, have irq 10, want irq 7
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
<6>ata1: SATA port has no device.
<6>scsi0 : ata_piix
<6>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
<6>ata2: SATA port has no device.
<6>scsi1 : ata_piix
<3>ide0: I/O resource 0x1F0-0x1F7 not free.
<3>ide0: ports already in use, skipping probe
<3>ide1: I/O resource 0x170-0x177 not free.
<3>ide1: ports already in use, skipping probe
<7>Probing IDE interface ide2...
<7>Probing IDE interface ide3...
<7>Probing IDE interface ide4...
<7>Probing IDE interface ide5...